Design buck converter with variable switching frequency by using matlab simulink simulation
DOI:
https://doi.org/10.29210/881201Abstract
This paper presents the design of a buck converter circuit with different input switching frequency by using Matlab Simulink software. This study focuses on defining the suitable value of the inductor and capacitor to be used in the buck converter with 100VDC supply input, where the input switching frequency is use 5kHz and 25kHz. This is because the input switching frequency of a buck converter affects many aspects of circuit functionality. This design of the circuit used 20% of the duty cycle, and inductor value is 25% of Lmin to ensure the operation is in continuous current mode. The evaluation of inductor current and switching frequency used in the circuit and parameters for this analysis based on the output voltage, inductor voltage and inductor current waveform. The design of the circuit verified by simulation and results compared with the theoretical. In addition, the appropriate input switching frequency between 5kHz and 25kHz has been determined in order to use in the buck converter circuit for 100Ω resistive load.References
Espacios, H. R., & Autores, L. O. S. (2019). Methodology for teaching the buck converter : step by step description of the design. (2005).
Gupta, M., & S. P. Phulambrikar. (2014). Design and Analysis of Buck Converter. 3(3), 2346–2350
Izwan. (2013). Buck Converter Switching Design Using Microcontroller. Universiti Tun Hussein Onn Malaysia.
Lopa, S. A., Hossain, S., Hasan, M. K., & Chakraborty, T. K. (2016). Design and Simulation of DC-DC Converters. International Research Journal of Engineering and Technology, 2395–56.
Rashid, Muhammad (2017), Power Electronic Handbook (4th Edition). San Diego, California: Academic Press.
Robert (2018), How to Choose the Frequency of Your Switching Regulator, Retrieved from
S.A. Ali, N.A. Riyard, Design of a Non-Ideal Buck Converter Volume 03 Issue 2. International Research Journal of Engineering and Technology.
Wang, F., & Ma, X. (2011). Research on the influence of switching frequency on low-frequency oscillation in the voltage-controlled buck-boost converter. Mathematical Problems in Engineering, 2011. https://doi.org/10.1155/2011/926403
Xiao, Z., Khoa, B. a., & Siek, L. (2017). On-chip reconfigurable switched-capacitor DC-DC converter for indoor PV energy harvesting. Electronics Letters, 53(2), 108–110. http://doi.org/10.1049/el.2016.3018
Xie, H., & Guo, E. (2019). How the Switching Frequency Affects the Performance of a Buck Converter. 1–8.
Downloads
Published
Issue
Section
License
IJTIH is an Open Access Journal. The authors who publish the manuscript in this journal agree to the following terms:
IJTIH is licensed under a Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.
This means:
IJTIH is licensed under a Creative Commons Attribution 4.0 International License.
(1) Under the CC-BY license, authors retain ownership of the copyright for their article, but authors grant others permission to use the content of publications in IJTIH in whole or in part provided that the original work is properly cited. Users (redistributors) of IJTIH are required to cite the original source, including the author's names, IJTIH as the initial source of publication, year of publication, volume number, issue, and Digital Object Identifier (DOI); (2) Authors grant IJTIH the right of first publication. Although authors remain the copyright owner.
